Fusion 360 Assignments

Below are some Fusion 360 Assignments. You will receive emails when this page has been updated.  **UPDATE** I’ve reorganized the page so the oldest assignments are on the bottom and newest on top.


Assignment #13 – Canoe Part 3| Monday April 27

Another week, another CAD Challenge.  The canoe project continues with Part 3 (I promise this is the last piece of this project)!

Let me know if you have any questions.


Assignment #12 – Canoe Part 2| Monday April 20

Another week, another CAD Challenge.  The canoe project continues with Part 2! Let me know if you have any questions.


Assignment #11 – Canoe | Monday April 13

Another week, another CAD Challenge. This week will begin a canoe project. To start we will make the shell of the canoe using SURFACE tools. Check out the video below and follow along. Post images of your completed shell in the fusion channel on Discord by Sunday April 19th.


Assignment #9 – Lamp Shade | Monday April 6

Another week, another CAD Challenge. I’ve left many of the details for this challenge to you. See how far you can get without any help. Updates coming later in the week.



Mr. L


Assignment #8 – Assemblies and Motion | Monday March 30

Hopefully you were able to do some work on your Arduino Enclosure. If you still have not done so, please post an image of your project on our Discord server. Remember to post on the fusion-360 channel.

For today’s assignment, we are going to look at creating assemblies with Joints and adding motion to assemblies within Fusion. Check out the video below and ask any questions you have on Discord. Stay safe out there!

Mr. L


Assignment #7 – Finished Arduino Enclosure | Thursday March 26

You should be getting close to finishing your Arduino Enclosure. Please post images on our Discord. Post questions on our Discord as well. If you are not joining Discord, please send images and questions to me via email. Below is a video of how to finish the Arduino Enclosure. Enjoy!


Assignment #6 – Arduino Enclosure Tips| Wednesday March 25

Hopefully you have all started working on your Arduino Enclosure Fusion project. Please post images in the fusion-360 channel on Discord. I’ve put together a short video with step by step instructions for how I created the enclosure up to the point shown in the last video. Please let me know if you have any questions. Check out the video below.



Assignment #5 – Arduino Enclosure | Monday March 23

Starting this week off with a new project for everybody to work on – an Arduino Uno enclosure. We’ll try this project a little at a time – hopefully we can finish this project by the end of the week.

Here is a link to the Arduino Uno Dimension Sheet

And here is the link to the Arduino Uno Fusion File

Watch the video below and send a screenshot of your progress to the fusion channel on our Discord by this Wednesday March 25.

If you have any questions, you can send an email or post on Discord. Look forward to seeing what you guys come up with, please watch the video below before starting.



Assignment #4 – Components and Animations

Got this one out a bit late today, but feel free to work on it when you have some time. The assignment is regarding components, Rule #1, and animations. See if you can recreate what you see in the video. Let me know if you have any questions via email.

Have a great weekend and stay safe out there.



Mr. L

Quick Tip #1 | March 19

Some of you have mentioned having issues with Fusion 360 continually doing an update. One way to get around this issue is to use Fusion in your browser. Watch this quick video for how to get Fusion working in your browser instead of using the desktop app. The link I mention in the video myhub.autodesk360.com

As always, if you have any questions please contact me via email.



Mr. L

Assignment #3 | March 18

There is another set of lessons I’d like everybody to watch and work on. These are the Mechanical Assemblies Fundamentals. There are 7 lessons and 7 Quick Tips, please go through all of them Check out the below video for more information. Stay healthy.

You should work on these videos through Friday. Next Monday I will have more videos for you to work on from home.

Also note, there is an actual assignment here, Each student should email Mr. L at least 1 question regarding what they saw in these lessons, which will be addressed in future videos.



Mr. L

Assignment #2 | March 17

Another quick video of suggested Fusion 360 lessons. This time there are only 3 short lessons regarding Sketches and Parameters. I will do a more in depth video on parameters soon, so please get through these. Watch the video below for more information.



-Mr. L

Assignment #1.5 | March 16

Created a somewhat short video going over some tips and tricks I believe are helpful when learning Fusion 360. Check out the video and see if know these tips. Have some that I should have included? Send me an email and I’ll try and get them into the next video.

-Mr. L




Assignment #1 | March 16-17

*Note – All assignments are optional

If you are able, download Fusion 360 to your home computer. Link here.

Please complete all 21 Lessons from the Getting Started with Fusion lessons (minus the 3 mentioned in the video) from the Self Paced Fusion 360 tutorials. Please email me or Mr. Christy with any questions, nlewkowitz@medford.k12.ma.us or schristy@medford.k12.ma.us

Check out the video below for more help. Each student should email Mr. L at least 1 question regarding Fusion 360, which I will address in a future video. Feel free to email your question – video submission for bonus points.



%d bloggers like this: